danejeffrey.com » moh http://danejeffrey.com/blog Good ways to break things. Fri, 09 Mar 2012 06:54:11 +0000 en hourly 1 http://wordpress.org/?v=3.3.1 Cisco Multicast MOH Stream Monitoring http://danejeffrey.com/blog/2009/09/29/cisco-multicast-moh-stream-monitoring/ http://danejeffrey.com/blog/2009/09/29/cisco-multicast-moh-stream-monitoring/#comments Tue, 29 Sep 2009 00:40:52 +0000 danejeff http://danejeffrey.com/blog/?p=175 If you have MOH configured to stream multicast from flash on a router / voice gateway, you can use: show ccm-manager music-on-hold to see the current MOH sessions that are active. The output will show: Multicast Address RTP Port Number Packets in/out Call id Codec Inbound Interface (this will be the bind interface for the [...]
]]>

If you have MOH configured to stream multicast from flash on a router / voice gateway, you can use:
show ccm-manager music-on-hold

to see the current MOH sessions that are active. The output will show:

  • Multicast Address
  • RTP Port Number
  • Packets in/out
  • Call id
  • Codec
  • Inbound Interface (this will be the bind interface for the show ccm-manager music-on-hold bind <Interface> command)

    • The Call id field is good for tracking calls back through:
    show voip rtp connections, etc if you need to do that.

    ]]> http://danejeffrey.com/blog/2009/09/29/cisco-multicast-moh-stream-monitoring/feed/ 0